5 Ton Overhead Crane - Voitto Crane

5-тонный мостовой кран

This 5-ton overhead crane is a bridge-type lifting device. Designed specifically to handle loads weighing up to 5,000 kilograms, it is capable of covering the entire three-dimensional workspace within industrial facilities. With a runway span ranging from 7.5 to 31 meters, this stationary material-handling equipment is widely used for high-frequency operations in manufacturing plants, steel fabrication shops, automotive manufacturing facilities, and large-scale distribution centers.

Грузоподъемность: 5 тонн
Размах: 7,5 ～ 31,5 м
Lifting Height: 6, 10, 16 m

A 5 ton overhead crane is an electric overhead lifting device. This unit has a rated lifting capacity of 5,000 kilograms, a span range of 7 to 31 meters, and a duty class of A3 to A5. Typically, users install this equipment in manufacturing plants, warehouses, and processing workshops to lift materials vertically. It has a standard lifting height of up to 16 meters and operates on three-phase AC power (voltage range 220V to 660V). Certain models of the 5 ton overhead crane comply with the requirements of the EU Directive 2006/42/EC (CE certified) and are manufactured in accordance with the ISO 9001:2015 quality standard.

Описание продукта

A 5-ton overhead crane is a type of bridge material-handling equipment that operates along a fixed path. The equipment is mounted on a track beam system above the factory floor to lift and move loads horizontally. This lifting capacity class places it in the light-to-medium industrial category, and it is one of the most commonly used lifting solutions. According to the FEM 1.001 standard, a 5-ton overhead crane typically falls within service classes A3 to A5, meaning they can withstand 100,000 to 200,000 operating cycles over their entire service life.

Structurally, the crane’s main girder spans the entire working area, while the end car runs along parallel rails. The hoisting mechanism moves along the main girder, enabling the system to move loads in three directions: longitudinal, transverse, and vertical.

Types of 5 Ton Overhead Crane

This 5-ton overhead crane is available in a variety of structural configurations. Therefore, buyers should select the appropriate equipment type based on operating conditions, headroom, duty cycle, and span.

5 Ton Single Girder Overhead Crane

This 5 ton single-girder overhead crane features a single-girder structure. Users can choose to equip it with either a wire rope hoist or an electric chain hoist as the lifting mechanism. It has a maximum span of 31 meters and a relatively light structural weight. Compared to a double-girder design, this model reduces the load on the track beams by 30%. It is suitable for applications with limited headroom and light lifting loads.

5 Ton European Overhead Crane

The HD European overhead crane is a lifting device designed and manufactured in accordance with European technical standards. Specifically engineered for various precision applications, it features high efficiency, energy savings, a compact design, and reliable performance. Compared to traditional single-girder cranes, the HD-type crane offers a lighter weight, smoother operation, lower energy consumption, and reduced maintenance requirements.

5 Ton Underhung Bridge Crane

This suspension underslung crane offers a space-saving material handling solution. The end beams of these cranes are suspended from tracks mounted on the roof structure or building ceiling, eliminating the need for support columns and freeing up floor space. They are ideal for facilities such as workshops, warehouses, assembly lines, maintenance facilities, and light manufacturing plants where optimizing floor space is essential.

5 Ton Double Girder Overhead Crane

The hoist trolley of this double-girder crane runs on two parallel main girders. This design not only saves headroom but also meets higher-level operational requirements. In addition, the use of an upward-traveling trolley structure allows for a lower hook height under the same building headroom conditions. For applications with spans exceeding 22 meters, the double-girder design is the preferred engineering solution.

5 Ton Explosion-proof EOT Crane

This explosion-proof EOT crane is a lifting device specifically designed for hazardous environments where flammable gases, vapors, dust, or explosive mixtures are present. The equipment is manufactured in strict compliance with relevant explosion-proof standards and is equipped with explosion-proof motors, electrical components, control systems, and safety devices.

5 Ton Grab Overhead Travelling Crane

A grab overhead travelling crane is a piece of equipment designed for handling bulk materials. Operators use this equipment to perform tasks such as loading, unloading, transferring, and stacking bulk materials. Equipped with mechanical, hydraulic, or electro-hydraulic grabs, this equipment can efficiently handle materials such as coal, ore, sand and gravel, scrap metal, biomass, and fertilizer.

5 Ton Overhead Crane Parts

The 5 ton overhead crane parts consist of the main beam, end beam, lifting mechanism, running mechanism, and electrical control system. Below, I will introduce each of its components to you.

Main Girder and End Beams: The main girder is the primary structural component. It supports the hoisting mechanism and transmits the wheel load to the track. The end beams house the running wheels and the gantry drive system.
Подъемный механизм: The hoisting mechanism consists of a drum, multi-strand steel wire rope, a rope guide, a hook assembly, and a motor.
Electric Trolley: The traverse trolley carries the hoisting mechanism as it moves along the main girder.
Electrical Control Cabinet and Variable Frequency Drive: A steel enclosure houses contactors, overload relays, a PLC, and a variable frequency drive, all compliant with the IEC 60204-32 standard.
Rail System: This system is mounted on the rail girder and provides the path for the travel system.

Key Features of the 5 Ton Overhead Crane

Each 5 ton overhead crane incorporates design features that ensure safe, efficient, and long-service operation across diverse industrial environments.

The heavy-duty box-type main girder is manufactured in accordance with the GB/T 14405 welding quality standard, and its pre-camber is calculated based on the deflection limit specified in FEM 1.001 (L/700 at full load).
The hoist system, main girder, and trolley motors all utilize variable frequency drives (VFDs), which reduce inrush current during startup, extend the service life of the brakes, and enable stepless speed control (typically two-speed or stepless).
The absolute encoder positioning system (optional) provides precise position control within ±5 mm, meeting the crane control requirements of EN 13557.
The overload limiter is set to 110% of the rated load (in accordance with ISO 4301-1) and features an automatic cut-off function to prevent structural overload.
The PLC controller incorporates a sway prevention algorithm to minimize load sway during acceleration and deceleration.
The electrical control cabinet complies with CE certification and the IEC 60204-32 standard, featuring an IP54 protection rating as standard (an IP65 rating is available as an option for environments requiring washdown cleaning).
Track installation deviations are strictly controlled within ±1 mm/m (in accordance with the EN 1090-2 manufacturing standard), ensuring smooth wheel operation and minimizing track wear.

Приложения

A 5 ton single girder overhead crane and its double-girder counterparts are widely used across various industries.

Производство: Users employ this equipment for loading and unloading CNC machining units, transferring components between workstations, and performing maintenance tasks on large presses.

Steel Structure Manufacturing Workshops: Operators use this equipment to lift structural components for positioning, flip beams, and transport materials for assembly.

Автомобилестроение: Users employ this equipment to transport engines and transmissions on assembly lines and to change dies on press machines.

Складирование и логистика: Users operate this equipment to lift goods to receiving platforms at heights of 6 to 9 meters and to perform pallet stacking and retrieval operations within rack aisles.

Mines and Quarries: Equipment maintenance areas requiring high-frequency, heavy-duty operations where cranes must meet the A5 duty class.

Shipyards and Port Facilities: Component pre-assembly stations within large work areas spanning 22 to 31 meters.

5 Ton Overhead Crane Specifications

Параметр	Спецификация
Грузоподъемность	5 tons (5,000 kg)
Длина пролета	7 m – 31 m (standard)
Класс трудовых обязанностей	A3, A4, A5 (per FEM 1.001 / ISO 4301-1)
Высота подъема	6 m / 9 m / 12 m / 16 m
Источник питания	220 V ~ 660 V, 50–60 Hz, 3-phase AC
Температура окружающей среды	-20 °C to +40 °C
Relative Humidity	≤ 85%
Control Mode	Floor pendant / Wireless remote / Cabin (operator cab)
Structural Standard	GB/T 14405, FEM 1.001
Explosion-Proof Class	Ex d IIB T4 / Ex d IIC T4
Electrical Standard	IEC 60204-32, EN 13557
Safety / Quality	CE (2006/42/EC), ISO 9001:2015

5 Ton Overhead Crane Price

Below, I have provided a table showing the price ranges for different types of 5-ton overhead cranes. Actual prices may vary depending on components, span, and lifting height. The price is subject to the actual specifications.

Тип крана	Грузоподъемность	Диапазон пролета	Рабочая обязанность	Референтная цена (USD)
5 Ton Single Girder Overhead Crane	5 Ton	7.5-31.5 m	A3-A4	$3,500 – $8,000
5 Ton European Overhead Crane		7.5-28.5 m	A5	$7,000 – $14,000
5 Ton Underhung Bridge Crane		7.5-28.5 m	A5	$6,000 – $12,000
5 Ton Double Girder Overhead Crane		10,5–31,5 м	A5-A6	$8,500 – $18,000
5 Ton Explosion-proof EOT Crane		7.5-28.5 m	A3-A4	$7,500 – $16,000
5 Ton Grab Overhead Travelling Crane		10,5–31,5 м	A5-A6	$12,000 – $25,000

Примечание: The above prices are for reference only. Actual costs depend on the specific specifications.

Customized 5-ton Overhead Crane Solutions

We provide custom 5 ton overhead crane solutions based on your span, lifting height, working duty, power supply, workshop dimensions, and industry requirements.

Load Capacity: 5 tons
Пролет: регулируется в соответствии с размерами вашего объекта (обычно от 7,5 м до 31,5 м)
Lifting Height: Customizable (6 m~16 m)
Варианты управления: Дистанционное / Управление из кабины
Скорость подъема: настраиваемая
Источник питания: 3 фазы переменного тока, 50 Гц, 380 В
Распределитель: крюк или крановый грейфер

Whether you need a single-girder, double-girder, underslung type, European standard, explosion-proof, or grab crane. VOITTO Crane engineering team can design the most cost-effective solution for your project.

5 Ton Overhead Crane for Sale

VOITTO Crane is a specialist 5 ton overhead crane manufacturer with engineering, fabrication, and testing facilities dedicated exclusively to overhead material handling equipment. With advanced design concepts, sophisticated manufacturing processes, and strict quality control, VOITTO has established strategic partnerships with over 70 countries worldwide.

Если у вас есть особые требования или вам нужна дополнительная помощь, пожалуйста, не стесняйтесь обращаться к нам. связаться с нами.

Алан

Специалист по крановым решениям · Voitto Crane

10+Годы работы.

5,000+Клиенты

50+Страны

Специализируемся на экспортных решениях в области мостовых кранов, козловых кранов, поворотных кранов, портовых кранов и мостовых кранов. Более 10 лет помогаем глобальным клиентам в проведении предпродажных консультаций, выборе грузоподъемности и разработке конфигураций с учетом специфики объекта.

+86 136 3963 3287 [email protected]

ЧАСТО ЗАДАВАЕМЫЕ ВОПРОСЫ

What is the standard span range for a 5 ton overhead crane?

Standard span lengths run from 7 m to 31 m, though engineering teams can supply custom spans on request. Span selection depends on bay width measured between runway rail centrelines, minus clearances specified in GB/T 14405 and FEM 1.001 end approach dimensions.

How do I select between a single girder and a double girder 5-ton overhead crane?

Single girder designs suit spans up to 22 m at duty class A3–A4 and offer lower cost and headroom savings of 400–600 mm. Double girder designs are recommended for spans above 22 m, duty class A5, or where a top-running hoist is required to maximise hook height under tight ceiling clearance.

Can a 5 ton overhead crane operate outdoors in temperatures below −10 °C?

Yes, provided the crane is specified with low-temperature steel, low-temperature-rated lubricants, motor space heaters, and an enclosure-heating option for the electrical panel. The standard working temperature range is −20 °C to +40 °C.

Which control mode is most suitable for a 5 ton single girder overhead crane in a busy warehouse?

Wireless radio remote control (EN 60068-2 environmental rating) is most practical in busy warehouses because it allows operators to move freely with the load. Moreover, it reduces floor congestion from pendant cables and improves load visibility. Cabin control is reserved for continuous, high-cycle-rate operations where operator fatigue becomes a factor.

5-тонный мостовой кран

Описание продукта