Visão geral do projeto
In August 2026 a Mexican purchasing manager contacted VOITTO directly. His workshop needed a lifting solution for daily maintenance — equipment overhaul, mold and fixture disassembly. Two decisions stalled the order: lifting capacity, and whether a standard hoist could run on his plant supply at all. The result: two 5-ton steel beam grua pórtico portátil units with electric travel.
Project Challenge
Before any quotation went out, our sales manager walked the working conditions through with the client — duty cycle, floor condition, headroom, power supply and the heaviest piece they handle. Three points came back that shaped the brief below.
- Moving heavy loads — pushing a loaded frame is unsafe, and forklifts cannot enter the narrow bays between machines.
- 3 tons or 5 tons — with a 3-ton fixture the client could not tell whether a 3-ton unit was enough, or whether a 5-ton unit was overkill for intermittent repair work.
- Grid mismatch — the hoist must run on 220V or 480V at 60Hz; a standard 50Hz motor over-speeds and overheats.
VOITTO Solution: 5-Ton Portable Gantry Crane
With those conditions confirmed, our project manager set the configuration point by point.
- 5 tons, 40% margin. A 3-ton fixture on a 3-ton crane runs at 100% of rating, before hook and sling weight, mold-break shock and off-centre load. The 5-ton unit brings the load ratio to roughly 60%, and the price step from 3 to 5 tons is small against the cost of a stalled repair.
- Mobility. Electric travel with two driven wheels, gear motor and pendant removes loaded pushing. Four 200mm PU casters carry individual brakes and locked swivel; outrigger legs with diagonal bracing and adjustable floor pads spread load before the lift. Travel is for positioning only — with a load on the hook, all four casters stay locked.
- Power. The wire rope hoist is wound for 60Hz at 220V or 480V, designed for the local frequency rather than a 50Hz unit relabelled, because winding governs torque, speed and heat at 60Hz.
- Safety. Upper and lower limit switches, emergency stop, overload limiter and A3 light-intermittent duty matching a maintenance cycle. The frame is fully bolted modular, no welding: two people assemble it in about half a day.

Product Specification
| Item | 5-ton caster-mounted portable gantry crane |
|---|---|
| Capacidade nominal | 5 toneladas |
| Span | 6m |
| Altura de elevação | 5.5m |
| Guincho | Wire rope electric hoist, 60Hz, 220V / 480V |
| Viagem | Electric drive, two driven wheels, pendant control |
| Casters | 4 × 200 mm PU, individual brakes, swivel lock |
| Classe de serviço | A3, light intermittent |
| Safety devices | Upper and lower limit switches, emergency stop, overload limiter |
| Frame | Fully bolted modular, no welding |
| Quantidade | 2 units |
Standard configuration for this project; final figures follow the signed technical agreement.
Feedback dos clientes
The client’s purchasing manager send VOITTO manager message. “The recommendation fitted our workshop, installation was easy, daily use is trouble-free, and efficiency has improved noticeably.” What he valued most, he said, was being advised on his real lifting scenario rather than handed a catalogue quote.
Conclusão
This order was never hard on tonnage — it was hard on fit. A floor nobody could drill into, repair bays that move, a roof that cannot take suspended load and a 60Hz grid rule out most catalogue answers. A 5-ton steel beam portable gantry crane on casters, with electric travel and a locally wound hoist, answered all three at once.
VOITTO builds to the working condition rather than to a stock list, and we put the reasoning in writing before the quotation, so the buyer knows why each number was chosen. If your workshop looks like this one, send us the span, the lifting height, the heaviest load and your local voltage — that is all it takes to start.
Obter cotaçãoFAQ About Portable Gantry Cranes
Can it run on a normal concrete floor?
Yes — standard for a trackless model. Use compacted concrete around 150mm or thicker; for 5-ton units we recommend steel plates under each leg. Tell us if the slab is old or thin.
3 tons or 5 tons for a 3-ton load?
5 tons. Rated capacity is what you may lift repeatedly, not what breaks the crane — hook, slings, mold-break shock and off-centre weight all add on, so a 3-ton crane at 3 tons sits at 100% load ratio while a 5-ton unit stays around 60%. The price step from 3 to 5 tons is small next to one stalled repair; the real waste would be a crane that limits what you can lift.
Which industries use portable gantry cranes?
Anywhere a load below 10 ton has to be lifted where no overhead crane can reach. The common ones are manufacturing workshops, warehouses&logistics centers, automotive repair workshops,maintenance & repair facilities, metal fabrication workshops and construction sites.
Ready to Get Your Custom Portable Gantry Crane Solution?
Send your span, lifting height, heaviest load and local voltage — the VOITTO team replies with a selection proposal and quotation within 24 hours.
Alan
Especialista em soluções para guindastes · Voitto Crane
Especializada em soluções para exportação de pontes rolantes, pórticos rolantes, guindastes de braço, guindastes portuários e pontes rolantes EOT. Mais de 10 anos auxiliando clientes globais com consultoria pré-venda, seleção de capacidade e configurações específicas para cada local.
Global Presence, Proven Quality: VOITTO at International Trade Shows
