Sobre a Voitto

Voitto Crane has been dedicated to the design, manufacturing, and supply of high-quality crane systems for over three decades.

experiência

30

+Years

experiência global de exportação

cliente

3500

+

equipamentos que cobrem 80 países

exportações

70

%

as exportações centram-se nos mercados emergentes

serviço

24

H

resposta do serviço em linha

Equipamento

Potência de precisão, solução personalizada para gruas

Blogue

Tudo o que quer saber sobre gruas
28
2026-10
Ponte rolante tipo pórtico treliçado vs. Ponte rolante tipo caixa: comparação de engenharia, detalhamento de custos e guia de seleção para uso externo.

A truss gantry crane outperforms a box-girder gantry crane on high-wind coastal or mountain sites, on spans beyond 25–30 meters, in temporary precast concrete yards, and wherever soil bearing capacity is low. The open lattice cuts structural deadweight by 20%–35%, removes 60%+ of the windward surface area, and can lower total project cost (crane plus civil runway foundation) by 15%–30%. Those savings come from physics, not from thinner steel: bending stress is converted into axial force in the truss members, and crosswind passes through the structure instead of loading it. Starting with the key factors in deciding on the purchase of outdoor lifting equipment, this guide compares these two structural types, including wind load characteristics, wheel load and foundation costs, deflection under long spans, duty classes, corrosion protection and maintenance, and equipment relocation. In addition, this guide identifies specific operating conditions for which truss gantry cranes are not suitable. Please continue reading: Why Triangular Space Truss Design Changes Outdoor Lifting Economics A truss girder is built from angle steel or structural tubing arranged in triangulated panels. Each member carries mainly…

23
2026-10
Avaliação de riscos de pontes rolantes: perigos ao nível do solo, modelo matricial e controles de engenharia.

A gantry crane risk assessment has to start at the floor. Its outriggers, base beams, wheels, and power supply systems are all located at ground level, sharing the same space as pedestrians and forklifts, and are subject to environmental factors. Mobile equipment suffers from instability in its casters; outdoor equipment faces wind loads; and long-span equipment may experience outrigger skew. Precisely because of these ground-level hazards, one of the most common compliance errors often comes at a high cost: directly “copying and pasting” the risk assessment plan for indoor overhead cranes onto gantry cranes. While this approach may pass an internal audit, it overlooks nearly all of the genuine safety hazards surrounding gantry cranes that pose a threat to personnel. In the following sections, this guide provides a framework for identifying gantry crane hazards, a ready-to-use eight-row risk matrix, and in-depth analyses for different types of equipment. Additionally, the guide introduces various engineering controls that can fundamentally reduce risk levels without relying solely on operator vigilance. Gantry Crane vs. Overhead Bridge Crane Risk Profiles: Why the Difference Matters Bridge cranes…

22
2026-10
Como usar um guindaste pórtico: operação passo a passo, procedimentos operacionais padrão de segurança e melhores práticas.

Knowing how to use a gantry crane comes down to a handful of habits repeated on every lift. Improper operation on the production floor often manifests as swinging loads that pose safety risks; damage to wire rope guides caused by lateral pulling; and deformation of the crane structure, which can lead to cracks at the toe of the welds where the outriggers connect to the main girder several months later. The vast majority of these failures stem from operators’ technical shortcomings, rather than an insufficient rated lifting capacity of the crane itself. This guide covers the differences between portable shop equipment and heavy-duty industrial equipment, a 6-step standard operating procedure (SOP), outdoor wind protection measures, the selection of control modes, and the five most common mistakes made by operators—mistakes that often result in high repair costs and downtime losses for plants. This guide is specifically designed for operators, plant managers, and Environmental, Health, and Safety (EHS) directors, and its content complies with relevant standards and classification requirements such as OSHA 1910.179, ASME B30.2/B30.17, and FEM/ISO. Know Your Equipment First: Portable…

Topo